Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Valve Actuator Materials

Status
Not open for further replies.
mflam

mflam

Civil/Environmental
Joined
Apr 12, 2005
Messages
30
Location
US
It has come to my attention that some newer valve actuators are made of fiber reinforced polyester or other plastics.
I'm looking at hydraulic cylinder linear actuators in particular.
Any comments on how they perform and hold up?
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
HDD, Duckbill Valve and Air Valve
Replies
8
Views
7K
pointsman
pointsman
RReal2024
  • Locked
  • Question Question
Pipe Connection - different materials and sizes
Replies
6
Views
962
RReal2024
RReal2024
ntandomansa
  • Locked
  • Question Question
Using a Larger Combination Air Valve on a Smaller Pump Mains
Replies
4
Views
903
NW_Wash_Eng
NW_Wash_Eng
swazimatt
  • Locked
  • Question Question
EPAnet Pressure Reducing valve
Replies
1
Views
1K
swazimatt
swazimatt
Adam1900
  • Locked
  • Question Question
Potable Water Pipe Valves Fittings Protection in Fillcrete Backfill
Replies
3
Views
1K
bimr
bimr

Part and Inventory Search

Sponsor

Back
Top