Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Vacuum Break Valve

Status
Not open for further replies.
tercalla

tercalla

Civil/Environmental
Joined
Jul 19, 2006
Messages
5
Location
US
...or any valve that spits, for that matter.

Anyone have a good/easy/cost effective way to minimize or capture the spit from a valve? Please reply with mfgs of capture insturments, if you can think of any.

Thanks!
 
Status
Not open for further replies.

Similar threads

S
  • Locked
  • Question Question
HDD, Duckbill Valve and Air Valve
Replies
8
Views
7K
pointsman
pointsman
michaeljack88
  • Locked
  • Question Question
Hydraulic Design - Break Pressure Tank
Replies
17
Views
2K
katmar
katmar
ntandomansa
  • Locked
  • Question Question
Using a Larger Combination Air Valve on a Smaller Pump Mains
Replies
4
Views
886
NW_Wash_Eng
NW_Wash_Eng
swazimatt
  • Locked
  • Question Question
EPAnet Pressure Reducing valve
Replies
1
Views
997
swazimatt
swazimatt
Adam1900
  • Locked
  • Question Question
Potable Water Pipe Valves Fittings Protection in Fillcrete Backfill
Replies
3
Views
1K
bimr
bimr

Part and Inventory Search

Sponsor

Back
Top