Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
V4 Surfacing Do's and Don'ts
- Thread starter Darrude
- Start date
Your best bet is to take a refresher course, because if you were trained in Surfacing four years ago and have not put it to practice, then most of it will have gone.
The danger in trying to catch up from various websites and odd threads in forums, etc is that with unstructured learning there is the risk of adopting bad habits. It is possible to blunder along like this, but not much fun for anyone else who has to work with models that are badly put together.
It is in your employer's interest to give the proper training, it is a false economy not to do so.
The danger in trying to catch up from various websites and odd threads in forums, etc is that with unstructured learning there is the risk of adopting bad habits. It is possible to blunder along like this, but not much fun for anyone else who has to work with models that are badly put together.
It is in your employer's interest to give the proper training, it is a false economy not to do so.
- Thread starter
- #4
- Status
Similar threads
