Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UV Inhibitors Symbol

Status
Not open for further replies.

SDETERS

Agricultural
Joined
May 1, 2008
Messages
1,317
Location
US
Is there a standard to designate that a plastic part has some UV inhibitor added to it? For Example I see plastic parts that have the three recycle arrows in a cicle shape on plastic parts. So I did not know if there is a standard for the UV inhibitor added or not.
 
Not that I've ever heard of. The recycling symbols are very broad classifications, they don't indicate anything about fillers, impact modifiers, etc.

----------------------------------------

The Help for this program was created in Windows Help format, which depends on a feature that isn't included in this version of Windows.
 
Great we used a sun for our identifier. This is the best we could find and it made sense to our supply change. Thanks for the feedback
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top