Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Use of "hole series" in tooling design...

Status
Not open for further replies.
3dr

3dr

Automotive
Joined
Jul 10, 2004
Messages
456
Location
US
I can remember playing with this when it first arrived and chose against implementing it at the time. The details of why escape me now.

But I've got some call to provide fastener lists with our designs now, so I'm revisiting this capability at the next level up.
Just placing the screw / dowels at the ass'y level and let the software take care of the holes.

Is anyone in tool design or other disciplines currently doing this with success?

Any feedback on it? Is it solid?? Do the links breakdown frequently??

TIA for any insight I can get

Dave
Automotive Tooling / Aircraft Tooling / Ground Support Structures

NX9, Win 7 Pro SP1
 
Status
Not open for further replies.

Similar threads

shightower
  • Locked
  • Question Question
Countersink on both sides of hole in NX?
Replies
3
Views
2K
Bleaker
Bleaker
MANox
  • Locked
  • Question Question
Number of holes in Hole and thread callout
Replies
0
Views
1K
MANox
MANox
MANox
  • Locked
  • Question Question
Change tabs bar posiotion to "centered"
Replies
2
Views
452
MANox
MANox
Asieros
  • Locked
  • Question Question
Siemens NX Drafting - Reset the "Border to Arrow Distance"
Replies
0
Views
716
Asieros
Asieros
Anton Liubimov
  • Locked
  • Question Question
NxOpen, How to programmatically open a dialog box "Extrude"
Replies
2
Views
818
Anton Liubimov
Anton Liubimov

Part and Inventory Search

Sponsor

Back
Top