Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Use of Partially Prestressing design for Bridges in US

Status
Not open for further replies.
kww2008

kww2008

Structural
Feb 1, 2008
149
Is partial prestressing commonly used in bridge girder design in the US ? I think the AASHTO LFRD 2012 allows partial prestressing.
 
Status
Not open for further replies.

Similar threads

R
  • Question
Challenges in Modeling Live Loads for Seismically Isolated and Cable-Stayed Bridges
Replies
4
Views
6K
bugbus
bugbus
tmalik3156
  • Locked
  • Question
Light pole tabs on bridges
Replies
3
Views
1K
BridgeSmith
BridgeSmith
saurav.str
  • Locked
  • Question
Load Rating of Simple Made Continuous Steel Plate Girder Bridges
Replies
11
Views
736
BridgeSmith
BridgeSmith
saurav.str
  • Locked
  • Question
Live Load Distribution Factor using Lever Rule for Small Steel Bridges
Replies
9
Views
1K
BridgeSmith
BridgeSmith
tmalik3156
  • Question
Small Pedestrian Bridge Concept Design
Replies
15
Views
9K
BridgeSmith
BridgeSmith

Part and Inventory Search

Sponsor

Back
Top Bottom