Dainuri
Electrical
- Nov 20, 2015
- 4
Hi All,
I have a problem with Venturi Tube,
The venturi was designed with pressure drop 0 - 2500 mmH2O. Actually when the process online, the Flow Indicator showed always the max flow rate where theoretically the flow rate was only 80% from the maximum. I have checked all of the instrumentation device, and all is okay. so, the problem is the venturi has upscale pressure drop.
my question, if we assume that there is no mistake in the design,
what things can cause the upscale problem?
Thanks for reading, and I am waiting for your help.
Best Regards,
Akhmad Dainuri
I have a problem with Venturi Tube,
The venturi was designed with pressure drop 0 - 2500 mmH2O. Actually when the process online, the Flow Indicator showed always the max flow rate where theoretically the flow rate was only 80% from the maximum. I have checked all of the instrumentation device, and all is okay. so, the problem is the venturi has upscale pressure drop.
my question, if we assume that there is no mistake in the design,
what things can cause the upscale problem?
Thanks for reading, and I am waiting for your help.
Best Regards,
Akhmad Dainuri