cubalibre000
Mechanical
- Jan 27, 2006
- 1,070
Hi,
we have some workstations (three) that have this behaviour, descrived in the video attached.
It's normal that during the dimensioning, NX goes in update and return reactive after finish the update.
We have formatted the machine, but the problem return.
See the video.
Ideas ?
Thank you...
Using NX 8 and PDM RuleDesigner
we have some workstations (three) that have this behaviour, descrived in the video attached.
It's normal that during the dimensioning, NX goes in update and return reactive after finish the update.
We have formatted the machine, but the problem return.
See the video.
Ideas ?
Thank you...
Using NX 8 and PDM RuleDesigner
