unbend problem

[Israr]

How to unbend the attached part.


2005-04-07_123228_unbend.zip


Israr

 

[especial]

israr look on this forum, odd and end pg 22 sht metal part. see if this can solve your problemas. let us know

 

[AlbertHE]

Hi Israr,


I've tried to open this part with proe2001 and wf2 and it's impossible, at least to open, to see the geometry.


Big hug from Spain,


albert

 

[Israr]

The solution to my problem is:


2005-04-10_042413_funnel.prt.zip


Actually base corners have to be rounded otherwise its unrealistic and so impossible.


Israr

 

[Israr]

There is a free software PLATE'N'SHEET.Its very interesting and may be helpful for sheetmetal users.


Israr

 

[cristelino]

I think is not good to trust in this software


Or, anyway,depend prcision you want


ISRAR i dont forgot abbout createautomatic"DRAWING CREATION"


You will be the first person i inform


Was create dfor PROE 19


Everithing is changing........

Cristelino

 

[Israr]

Cristellino,


-------------------------------------------------------


You will be the first person i inform


Was create dfor PROE 19


Everithing is changing........


--------------------------------------------------------


I don't understand what do you mean?


Please elaborate a litte more.


Israr

 

[especial]

"israr look on this forum, odd and end pg 22 sht metal part. see if this can solve your problemas. let us know"


"The solution to my problem is:"


israr if you had looked on this forum for ideas,your model would contain 10 or 11 features instead of 48.


your model is ok, i guess, but it's too complicated for me. i use rev 2001

 

[dalex]

Israr,


Try this


2005-04-11_035909_brracelet.prt.zip


Move the insert here back till after the thicken operation.


Is this what you want?

 

[Israr]

Dalex,


Your part is a brace and my question is about afunnel. I have solved the question myself.


Israr

 

[dalex]

Israr,


Sorry I picked the wrong unbend problemon the forums.


Dalex