Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Unable to attach blends? 1

Status
Not open for further replies.
The 'trick' is to create a very small blend, in this case 0.01mm, on the sharp edge of the 'Drafted' faces of the bottom 'feature', as I have done in the attached model.

John R. Baker, P.E.
Product 'Evangelist'
Product Engineering Software
Siemens PLM Software Inc.
Industry Sector
Cypress, CA
Siemens PLM:
UG/NX Museum:

To an Engineer, the glass is twice as big as it needs to be.
 
 http://files.engineering.com/getfile.aspx?folder=90bc3f2c-8784-455b-81f6-a338b1910ebb&file=model2-JRB-1.prt
Interesting.

Thanks
 
The easiest way to get rid of faces like this without unnecessary features would be a face blend.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top