Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

UDF to find changing radius of inlet

Status
Not open for further replies.
DraMPaDu

DraMPaDu

Mechanical
Joined
Dec 2, 2014
Messages
1
Location
IN
I am running a FSI simulation. The radius of the fluid inlet changes every time step based on the deformation. The velocity profile at the inlet is based on this area and it changes every time step. Is there a way to measure the radius of inlet using a UDF?

THanks,
 
Status
Not open for further replies.

Similar threads

M
  • Question Question
spaceclaim to STEP format, Help needed.
Replies
2
Views
20K
mosenansi
M
O
  • Question Question
Simulation of a screw connexion
Replies
1
Views
4K
dgeesaman
dgeesaman
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X
nashki
  • Locked
  • Question Question
UDL on the Curve of Elbow
Replies
0
Views
3K
nashki
nashki
Faraz1997
  • Locked
  • Question Question
How to reduce number of iterations in tabular data of transient thermal analysis
Replies
3
Views
1K
NRP99
NRP99

Part and Inventory Search

Sponsor

Back
Top