TimBL
Mechanical
- Feb 11, 2004
- 6
I am looking for a two-way shaft mounted ratchet device for a manually driven machine. There does not appear to be an off the shelf product that meets this criteria. However I have seen on a low cost winch, a pivoted sprung component that meshes with one of the gear wheels to cause a two-way ratchet action.
Two questions 1) are there any off the shelf two way shaft mounted ratchets with a European distributor (expected loading 6Nm or greater) and/or 2) is there a publicly available standard design for the winch ratchet described above that will save me the effort of designing from basics.
Two questions 1) are there any off the shelf two way shaft mounted ratchets with a European distributor (expected loading 6Nm or greater) and/or 2) is there a publicly available standard design for the winch ratchet described above that will save me the effort of designing from basics.