Turning post

[gold-cam@dlc.fi]

Hello, does anybody know how to get basic postprocessor for turning. For example Mori Seiki SL-15 (control Fanuc 10T) or something like that? ISO-codewhere is G96 in use and so on. (CSS=Constant surface speed). Now the range is very poor in Creo.






Edited by: gold-cam@dlc.fi

 

[superqualicast]

See the link below. Hope you get solution over there.

Post-processors ? What you should know about them | CAMZone
Create a mill-turn postprocessor - Siemens PLM Community