Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Tuning fork - modal analysis :-)
- Thread starter Noirom84
- Start date
Does anyone of you have some technical drawings (with all dimensions) of that object?Hi!
I don't have any drawings, but I think it should be quite easy to estimate with a simple simulation. By adjusting the length of the fork you should be able to match the frequency
quite nicely, if you have fixed the material properties. Here some links about the subject and information which note matches what frequency.
Regards,
Jouni
I don't have any drawings, but I think it should be quite easy to estimate with a simple simulation. By adjusting the length of the fork you should be able to match the frequency
quite nicely, if you have fixed the material properties. Here some links about the subject and information which note matches what frequency.
Regards,
Jouni
- Status
Similar threads
