Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trying to vucanize o-rings

Status
Not open for further replies.
tsb2107

tsb2107

Chemical
Joined
Jun 18, 2015
Messages
1
Location
US
Hello,

I am looking to vulcanize several material and would like to know what temperature and cook times to vulcanize the following materials.

Explosive Decompression Viton 95 Duro
Viton (FKM)75 Duro
Nitrile (Buna) 70 * 90 Duro
Silicone 70 Duro
Aflas 80 Duro

Thank you and your help will be greatly appreciated.
 
Status
Not open for further replies.

Similar threads

lucky-guesser
  • Locked
  • Question Question
Urethane to Steel Epoxy Suggestions
Replies
4
Views
1K
lucky-guesser
lucky-guesser
Qcprick63
  • Locked
  • Question Question
Help,bonding Bronze bushing to Carbon fiber block
Replies
0
Views
903
Qcprick63
Qcprick63
R
  • Question Question
Seeking Guidance on Developing an Adhesive Coating Formula
Replies
5
Views
4K
btrueblood
btrueblood
Joel_Lapointe
  • Locked
  • Question Question
Classification of peroxide silicone sealant?
Replies
1
Views
1K
btrueblood
btrueblood
Fibre and resin guy
  • Locked
  • Question Question
Influence of post-cure temperature on final properties
Replies
3
Views
1K
Compositepro
Compositepro

Part and Inventory Search

Sponsor

Back
Top