Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

True stress and strains for Steel + ductility

Status
Not open for further replies.

Daemon1

Student
Joined
Mar 15, 2022
Messages
20
Location
CM
Hello, I wish to model a steel connection in Abaqus with steel S275 but I don't have the corresponding parameters :
-yield stress / plastic strain (I'd like up have the table of values of possible)
- damages parameters such as :Failure stress, stress triaxility

Please can some one send me these values or indicate to me where I can find it 🙏🏾, thanks in advance
 
I only can help you with the fact that the yield strength is usually in the range of 275 to 390 MPa, and the typical plastic deformation in tension is in the range of 0.2 to 0.25.Bye.
 
Um, type “S275 steel stress-strain curve” into Google.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top