Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trip Valves

Status
Not open for further replies.
slimym

slimym

Chemical
Joined
May 5, 2003
Messages
5
Location
US
I have a Mecman trip valve that requires a minimum of 1 bar of instrument air in order to operate. Normal pressure is about 7 bar. Any ideas on a safe value for the low pressure trip setpoint? Are there any guidelines for this?

thanks
 
Status
Not open for further replies.

Similar threads

Fat Tony
  • Question Question
Max allowable pressure drop for control triple eccentric butterfly valves
Replies
5
Views
5K
Fat Tony
Fat Tony
p6g2p6
  • Question Question
Low cost butterfly valves without the rubber lining
Replies
3
Views
4K
Danlap
Danlap
Inchtain
  • Question Question
Seat Rings of small and big size ball valves
Replies
3
Views
3K
Danlap
Danlap
AM14
  • Locked
  • Question Question
Fire Safe test for Butterfly valves
Replies
2
Views
3K
Danlap
Danlap
Inchtain
  • Locked
  • Question Question
Pressure Testing of Valves
Replies
4
Views
3K
Vegas Consulting
Vegas Consulting

Part and Inventory Search

Sponsor

Back
Top