Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Trap Efficiency in Sediment Basin - HEC-HMS, SEDCAD, SEDIMOT

Status
Not open for further replies.
DS00000

DS00000

Civil/Environmental
Joined
May 23, 2011
Messages
2
Location
US

I have a project in SC and SCDHEC has asked we perform sediment trapping efficiency using SEDCAD or SEDIMOT (the drainage areas to the pond are > 30acres so we cannot use the normal settling velocity and d15 charts). I am close to solving this problem in HEC-HMS but not entirely there yet. Has anyone used HEC-HMS to compute the trapping efficiency (%)?

Or is anyone familiar with SEDCAD that has time this week / next week to take on a small project?
 
Status
Not open for further replies.

Similar threads

darthsoilsguy2
  • Locked
  • Question Question
Using 3 ft diameter HDPE pipe as a catch basin
Replies
5
Views
1K
darthsoilsguy2
darthsoilsguy2
A
  • Question Question
How to use SRM Inclusion in MIDAS GTS NX?
Replies
0
Views
7K
abrarnth
A
MBB138
  • Locked
  • Question Question
Sediment Basin/Bulk Flow Hydrology Calculations
Replies
2
Views
267
MBB138
MBB138
C
  • Locked
  • Question Question
Concrete in Bored pile head
Replies
4
Views
4K
BridgeSmith
BridgeSmith
T
  • Question Question
Thermal load with thermal gradient in structural analysis
Replies
6
Views
860
Amp Dylan
A

Part and Inventory Search

Sponsor

Back
Top