Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Translate Welds from SolidWorks 2011 to Ansys Workbench 14

Status
Not open for further replies.
twillkickers

twillkickers

Mechanical
Joined
May 22, 2012
Messages
2
Location
US
I am using Ansys 14 workbench to run an FEA from an assembly created in SolidWorks 2011. The model created in SolidWorks 2011 has many bead welds on it. (These welds were added using the "Weld Bead" command in SolidWorks, found under "Assembly Features") I am wondering if Ansys loads the bead welds into it when I open the SolidWorks file in Ansys Workbench, and if they affect the FEA results. I would like Ansys to run FEA using the welds. If I cannot import the welds from SolidWorks, can I add them using Ansys? Thanks for your help!
 
Status
Not open for further replies.

Similar threads

H
  • Locked
  • Question Question
how to apply triangular load on an area, in ANSYS Workbench static module
Replies
1
Views
3K
karachun
karachun
struclearner
  • Locked
  • Question Question
Reaction Force Distribution in ANSYS Workbench!
Replies
0
Views
1K
struclearner
struclearner
O
  • Locked
  • Question Question
ansys civata
Replies
0
Views
2K
oktaeng1
O
M
  • Locked
  • Question Question
ANSYS Mechanical Scripting: how to delete an existing heatflux?
Replies
0
Views
832
MihailW
M
X
  • Locked
  • Question Question
ANSYS mechanical : How to read the dimensions which are defined as function of other dimensions in UGNX as parameters in ANSYS?
Replies
0
Views
1K
xinyu3liu
X

Part and Inventory Search

Sponsor

Back
Top