Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Transfer Voltage using SKM's Ground Mat software

Status
Not open for further replies.
EddyWirbelstrom

EddyWirbelstrom

Electrical
Joined
Feb 17, 2002
Messages
217
Location
AU
The steel structure of a conveyor extends 400m beyond a substation which supplies the conveyor motors.
The conveyor steel structure is bonded to the substation earth grid.
The conveyor steel structure has concrete footings.
Does anyone know how to use SKM’s Ground Mat to calculate the ‘transfer voltages’ along the conveyor ?
 
Status
Not open for further replies.

Similar threads

Redskinsdb21
  • Question Question
Panel/Switchboard voltage matching
Replies
5
Views
7K
jackmarvia
J
S
Survalent hmi software vs zenon hmi software for scada
Replies
2
Views
9K
Lacquit
L
NickParker
  • Locked
  • Question Question
Auto Transfer Switch in place of Low Voltage breaker
Replies
7
Views
770
wcaseyharman
wcaseyharman
NickParker
  • Question Question
Harmonic Voltage factor and THD
Replies
0
Views
632
NickParker
NickParker
Cesme
  • Locked
  • Question Question
Voltage given from the secondary of the capacitive voltage transformer
Replies
6
Views
5K
FPelec
FPelec

Part and Inventory Search

Sponsor

Back
Top