Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

[TRANSCAD] Open some field during the opening of the DB

Status
Not open for further replies.
feli0

feli0

Civil/Environmental
Joined
Jun 19, 2009
Messages
1
Location
IT
Hi, I'm a transcad-user. I'm making a macro in gisDK, I need to open some field (DB rows) "From ID" and "To ID" during the opening of the database of grafh. is it a possible procedure or step ? can I do It? thanks.
 
Status
Not open for further replies.

Similar threads

TrustButVerify
  • Locked
  • Question Question
Generic radius of curve for cargo securing calculations
Replies
5
Views
1K
CrashXprt
CrashXprt
LiftDivergence
  • Locked
  • Question Question
Determination of Yellow Light Change Interval at Intersection
Replies
3
Views
1K
dik
dik
ajl_mo
  • Locked
  • Question Question
Are there standard levels of traffic control? Need to specify low-level traffic control for a bid.
Replies
2
Views
1K
bridgebuster
bridgebuster
Ale_Hideki
  • Locked
  • Question Question
Reaching the compaction value on field more than 100% for subbase and base
Replies
1
Views
311
Ron
Ron
hemant.math
  • Locked
  • Question Question
How to draw path of rear right wheel of (WB-15[WB -50]) Intermediate Semitrailer. #CenterTurningRadi
Replies
1
Views
607
eea
eea

Part and Inventory Search

Sponsor

Back
Top