Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

training class: introduction to Ansys Part II

Status
Not open for further replies.

lwf

Mechanical
Joined
Aug 9, 2007
Messages
19
Location
US
I plan to attend a training class on Ansys Part II, but I am not sure what I can get from the class. anyone attended this type of classes? any advice? any better classes? I wish through this class I can build complicated geometries using macro, perform map meshing, extract parameters from global model and run local model, perform nonlinear analysis (plasticity or creep), etc (seems some gaps for this class). The Syllabus of the class is as follows:

Array Parameters
Coupling & Constraint Equations
Working with Elements
Beam Modeling
Coupled Field Analysis
Submodeling
Modal Analysis
Introduction to Nonlinear Analysis
Bonded Contact
Macro Basics
 
Who's giving this class? It seems interesting. Why don't you just call them and ask to talk to an instructor?
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top