Toyota TOGO cad

[miked]

Does anyone have any experience with Toyota togo cad?

I have been given some parts that were converted to iges but they are horrible. Are there optimal settings for TOGO iges files for pro e?

Mike

 

[rajank21]

Mike,



We have worked with Togo cad data in the past and have always found them to be problematic. We have a services group that can help you recreate the data in Pro/E. Please contact me at (201) 995 9285 if you are interested in this.



Thank you

Kumar Rajan

CADCAM-E, Inc.

www.cadcam-e.com

 

[miked]

My contract with Toyota states that I cannot use a third party to convert my files.

As I had mentioned in a previous post, I have seen your site already. Please stop the sales pitch.

Mike

 

[daiosama]

I was just talking with my co-worker about different CAD programs I have used in the past and Togo CAD popped up.

I remember being a resident engineering in Toyota, Japan when they rolled out Togo. I ended up using it for a couple of years.

I can certainly see why one would have had a hard time importing togo iges files. togo was not a solid modeling program. it was wireframe with surface. most of the time you would have the outer skin and then would have to reference a section view to see the thickness.

Did any of you use togo cad? what year did Toyota come to their senses and dump it?