Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Totalopen area in filter paper media

Status
Not open for further replies.

1262

Automotive
Joined
May 30, 2002
Messages
2
Location
US
PLease advise on calculation to approximate the open area in filter media for the purpose of doing CFD on filters

 
technically, I have no idea

depending on what you're trying to find out in the CFD, it might be appropriate to measure pressure drop vs flow and make your model match that behavior.
 
Mike,
Correct,......
I am seeking to determine the pressure drop vs flow of fuel. With the CFD we have it is difficult to simulate the flow thru the paper media. I was wanting to be able to find out how to approx the open area in order to simulate that into the model of the filter prior to running the CFD
Thanks
Chander
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top