Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Torsional inertia of steel spine box girder

Status
Not open for further replies.
SammerCo

SammerCo

Structural
Joined
Mar 18, 2006
Messages
2
Location
CA
Hi, every body. In order to calculate longitudinal torsional inertia of steel spine box girder, it is required to calculate the transformed section of steel and concrete. The queastion, for transform section of steel , is n = 0.88 for steel prtion ?
Any body has an idea Pls.
Thanks
 
Status
Not open for further replies.

Similar threads

N
  • Question Question
I'm designing a steel box girder. Bearing Stiffeners. I want to modify the Bearing Stiffeners.
Replies
1
Views
2K
Lomarandil
Lomarandil
tmalik3156
  • Locked
  • Question Question
Encampment deterrent for steel girder bridge
Replies
9
Views
5K
tmalik3156
tmalik3156
question_asker
  • Locked
  • Question Question
Lateral Torsional Buckling of Composite Plate Girder during Bridge Demolition
Replies
7
Views
871
Lomarandil
Lomarandil
tmalik3156
  • Question Question
Old Through Plate Girder Bridge
Replies
10
Views
16K
BridgeSmith
BridgeSmith
PSR_1
  • Locked
  • Question Question
Grillage model for box girder bridge
Replies
3
Views
774
PSR_1
PSR_1

Part and Inventory Search

Sponsor

Back
Top