alishanawar
Mechanical
- Jan 29, 2013
- 1
dear experts..,
please tell me how to convert kips to ft-lb during torquing of structure boltss?
please tell me how to convert kips to ft-lb during torquing of structure boltss?
Eng-Tips is the largest forum for Engineering Professionals on the Internet.
Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!
-
Congratulations dmapguru on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
torque conversion
- Thread starter alishanawar
- Start date
- Status
Are you saying you want to know how to calculate what tightening torque you need to use in ft.lb achieve a given nominal bolt preload in 'kips'?
I believe there may be a FAQ in one of the forums that will help you, try searching for bolt torque calculations or similar. Or take a look in the FAQ section of somewhere like forum725.
I believe there may be a FAQ in one of the forums that will help you, try searching for bolt torque calculations or similar. Or take a look in the FAQ section of somewhere like forum725.
Posting guidelines faq731-376 (probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484
What is Engineering anyway: faq1088-1484
- Status
Similar threads
- Locked
- Helpful tip
- Locked
- Question
- Locked
- Question