Toolbox ??

[SWISGR8]

Seems we have always had problems with the Toolbox fasteners, etc. We have it located on a "server" and of course between unknown issues and server issues, we occasionally have problems with these fasteners (ie not finding specd config, etc and then messing everything up). Anyway, my opinion, in my limited knowledge base with this is that it might be best to use the Toolbox as a fastener insertion tool as opposed to an insertion AND location (which we currently do, ie the reference location is on the server). Maybe I'm crazy or something, any slapping around or straightening up would be greatly appreciated. Also, we have 1gb RAM on 2008, to me this is anemic beyond basic assys and parts, can anyone enlighten me with respect to this?

Thanks, you guys are always great and helpful.

 

[smcadman]

Go to Matt Lombard's site and pick Rules of Thumb > More Toolbox - Practical Usage Issues with Toolbox (workaround documentation)

http://mysite.verizon.net/mjlombard/

It's a file called "PracticalUsageIssuesToolbox.pdf" There is another file on there simply called "Toolbox" but the one I mentioned first is the most helpful for setting Toolbox up correctly.


Flores