Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

Register Log in
  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tolerance NFT58-000 Class reduce

Status
Not open for further replies.
Kae

Kae

Mechanical
May 3, 2000
16
Does anyone know the Tolerance NFT58-000? In the drawing defined Tolerance NFT58-000 Categirie4 Class reduce.
Many thanks in advance!
 
Status
Not open for further replies.

Similar threads

Poorpaulus
  • Question
Tightest realistic tolerance of a 200mm ID cylinder 1
Replies
11
Views
4K
GregLocock
GregLocock
D
  • Locked
  • Question
Confusion about positional tolerance for rectangular pins
2
Replies
21
Views
11K
Orange_kun
Orange_kun
Mech 3D
  • Locked
  • Question
Acceptable tolerance for surface defects on pressure piping
Replies
9
Views
4K
mfgenggear
mfgenggear
L
  • Locked
  • Question
Help setting up a tolerance stack up analysis for a door latch assembly
Replies
1
Views
1K
3DDave
3DDave
isantiago
  • Locked
  • Question
Class 4000 ASME
Replies
4
Views
203
georgeverghese
georgeverghese

Part and Inventory Search

Sponsor

Back
Top Bottom