Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

To check grain flow only

Status
Not open for further replies.

Ashwani61

Materials
Joined
Dec 13, 2019
Messages
1
Location
CA
Step down turning or machine the area .Sand it with 60 grit san paper and let it remain in 30% Hydrochloric acid or strong nital. Grain flow lines will clearly show up.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top