To Be Retired 3

[mongo46538]

Although I am to be Retired, probably not soon enough to avoid losing all of the favorite commands that have the "to be retired" tag attached to them.
Measure Face. Measure Body, Spline, Measure Distance, Measure Angle .. to name a few.
Running NX 12.0.2.9. Does anyone know which version will eliminate these commands completely?

Not Retired, just tired

 

[Rob_N]

All the measuring is under 1 command now. They introduced it in NX12.
There are quite a few videos on it on Youtube.


I'm still on NX1973 as most of our work is GM PPO.

The biggest issue I have is the new sketcher.

 

[cowski]

I'm currently using NX 1919. The measure commands you listed are nowhere to be seen, but the "spline (to be retired)" is still available.

www.nxjournaling.com

 

[mongo46538]

Thats good to hear, I use Spline frequently. The new "measure" has some of the features but it an all in one command and kinda clunky to me.

 

[Rob_N]

I'm stuck using NX 1973, but Spline(to be retired) is still in the latest major release NX2206, buried but still there and still (to be retired)

 

[jerry1423]

Here is a good video on the Measure Tool

https://www.youtube.com/watch?v=iWkhuummhUY

There are others on the siemens page too that I can track down.

Jerry J.
UGV5-NX1899

 

[mongo46538]

Thanks I need to remember to search youtube!

 

[Ehaviv]

Hi

I am also retired.

And if you want my experience.

There are a life outside NX.
(no matter which version)