Title block table problem 1

[kscnoname]

Hello I just create a new title block.
And I have a problem with a number attribute.
It always shows six digits after the comma.
If I use the same text outside of a table it just show the necessary digits.

I also tried the style settings of the table but that does not influence shown attributes (only numbers).

I also uploaded an example part to show my problem.
I used NX8.5 but I have the same problem in NX11.

Thanks

Klaus

Unigraphics NX Key user

it all started with V13

 

[Arkance/PhoeNX]

The problem is the extra text at the end. Removing the [kg] makes the attribute value the number of decimal places specified.

You could add another column and hide the line in between the cells and add the [kg] in that extra column.
or you can link to an expression and control the decimal places that way.

Uploaded is a video showing how to do the second suggestion.




Anthony Galante
Senior Support Engineer


NX3 to NX11 with almost every MR (24versions)

 

[kscnoname]

Dear PhoeNX.

Thanks for the Info.
I will split the column.
This will be the easiest solution without additional attributes.

Thanks

Unigraphics NX Key user

it all started with V13