Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

TIme history for von mises stress and strain for beam188

Status
Not open for further replies.
aleks1409979

aleks1409979

Civil/Environmental
Joined
Jul 31, 2012
Messages
4
Location
MK
Hello , i hope that i'm in right location ansys forum :)

Does anyone knows how to obtain the time history of von mises stress and strain for particular element in model using beam188 elements type.

when i use esol,2,31,36,s,eqv,vonmis in time history post processor there is no valid results actually there is no results it says invalid.

Suggestions ?

thanks very much

 
Status
Not open for further replies.

Similar threads

shiraz883
  • Locked
  • Question Question
Nodal forces and Von-mises stress
Replies
0
Views
438
shiraz883
shiraz883
V
  • Locked
  • Question Question
Boundary conditions and post processing for Planar tension test
Replies
0
Views
619
vsw
V
W
  • Question Question
Trying to couple a transient thermal and structural simulation but I get zero deformation and stress
Replies
0
Views
2K
weldtest12
W
Jeremy1989
  • Locked
  • Question Question
Difference in Von Mises Results Between Beam Model and 3D Model
Replies
2
Views
572
Stick.
Stick.
somebodyfromworld
  • Locked
  • Question Question
ACT extensions for Ansys
Replies
0
Views
1K
somebodyfromworld
somebodyfromworld

Part and Inventory Search

Sponsor

Back
Top