Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
thrust force on bearing
- Thread starter rwelk
- Start date
I talked to our old screw conveyer guru and he said that he designed for all the force the prime mover could input to the screw shaft. He tried to keep the thrust off the intermediate of hanger bearings.
He would typically limit the amount thrust by some type of decoupling device to keep from damaging a locked screw.
He would typically limit the amount thrust by some type of decoupling device to keep from damaging a locked screw.
- Status
Similar threads
- Locked
- Question
- Locked
- Question