I am looking for fit of thrust collar (with runner) on shaft for vertical motors.
Would appreciate any pointers or links.
Muthu
Would appreciate any pointers or links.
Muthu
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations MintJulep on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Thrust collar fit for vertical motors?
- Thread starter edison123
- Start date
- Thread starter
- #3
Hi John
This is a solid shaft 900 KW cage motor with the pump directly coupled at the bottom.
The thrust block has a thrust collar, which is shrunk fit on to the shaft and a bolted on thrust runner at the bottom, which glides over the thrust white metal bearings.
An illustrative pic below.
Muthu
This is a solid shaft 900 KW cage motor with the pump directly coupled at the bottom.
The thrust block has a thrust collar, which is shrunk fit on to the shaft and a bolted on thrust runner at the bottom, which glides over the thrust white metal bearings.
An illustrative pic below.
Muthu
- Status
Similar threads
- Locked
- Question