hadi2008
Automotive
- Apr 24, 2017
- 1
thread823-342601
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
thread823-342601
- Thread starter hadi2008
- Start date
- Status
GregLocock
Automotive
Are you seriously asking somebody else to look at the Help in ADAMS/Car for you? I know it is a dumbed down product, but really...
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Cheers
Greg Locock
New here? Try reading these, they might help FAQ731-376
Daniel Ursache
Mechanical
Let's take it step by step. Do you want to replace the default body (picture above) with another body made by you, right ?
So, regarding to connections between parts, here the things are established by communicators... you know? IN PUT and OUT PUT. If the CIL(R)/(S) is well linked by the COL(R)/(S) then the connections are suitable. But pay attention at matching name... The matching name of an CIL(R)/(S) MUST BE the same for an COL(R)/(S).
CIL - communicator input left
CIR - communicator input right
CIS - communicator input single
COL - communicator output left
COR - communicator output right
COS - communicator output single
- Status