thread561-374934 I can't selec

[Lars1978]

thread561-374934


I can't select a hole in the drafting environment when making a hole callout. It's the same as in the thread mentioned above.

Someone with any knowledge please help !!




Lars
Solid Edge
Inventor
NX10.0.3.5 native

 

[NutAce]

Is your Model fully loaded? the hole is not a mirror feature?

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5

 

[Lars1978]

natace,

model is fully loaded i can give dimensions to all other geometry


Lars


Lars
Solid Edge
Inventor
NX10.0.3.5 native

 

[NutAce]

Not a mirrored feature or part of a mirrored body?

Ronald van den Broek
Senior Application Engineer
Winterthur Gas & Diesel Ltd
NX9 / TC10.1.2
HPZ420 Intel(R) Xeon(R) CPU E5-1620 0 @ 3.60GHz, 32 Gb Win7 64B
Nvidea Quadro4000 2048MB DDR5

HP Zbook15
Intel(R) Core(TM) i7-4800MQ
CPU @ 2.70 GHz Win7 64b
Nvidia K1100M 2048 MB DDR5