thread in drawing section view

[nbjs]

why does this happen and how to solve it?

it's a bolt (from standard parts) and a threaded hole.
that hatch over bolt shouldn't be visible.

 

[KENAT]

Are you asking about the hatching?

It does appear to be a bit of a glitch. Probably to do with how SE is set to process the interference.

You can try right click on view, properties and I think the last tab will have the 'process interference' options - this might fix it though at the expense of more computing power.

Or, maybe try going into draw in view, deleting the default hatching and replacing it.

Posting guidelines faq731-376

http://eng-tips.com/market.cfm?

(probably not aimed specifically at you)
What is Engineering anyway: faq1088-1484​

 

[nbjs]

thanks for answer.

i already tried "process interference" options, it didn't helped. (anyway it's just a bolt and a nut in a drawing, nothing demanding.)

i'll try with deleting the hatching, but it would be just a workaround. this overlaping shouldn't appear at first place.