Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thin Metal Stretched Diaphrams

Status
Not open for further replies.

monstereng

Mechanical
Joined
Jul 8, 2003
Messages
1
Location
US
Does anybody have a good vendor source or good reference material for thin stretched metal diaphrams. I'm looking for a vendor or design resource for SS or Inconel (or other corrosion resistance metal) thin diaphrams with thicknesses of 0.025" to 0.005" with tolerances of +/- 0.0005 throughout entire thickness. Possibly vendors specializing in acoustic microphones or pressure sensors may be ideal candidates. Any help would be greatly appreciated.

MonsterEng
 
You can fax your specifications to (780) 473-0064, attention Toni Canonaco. Be sure to clearly indicate quantity requirements for each type of diaphram and expected time of delivery.

Voice messages can be reached at (780) 476-0615 or by cellular phone if the representative is out of the office, (780) 446-3581.

Kenneth J Hueston, PEng
Principal
Sturni-Hueston Engineering Inc
Edmonton, Alberta Canada
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top