Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations JAE on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thick plate cutting

Status
Not open for further replies.
laserman14

laserman14

Civil/Environmental
Joined
Jul 14, 2009
Messages
10
Location
US
Hi just want to know what kinds of thick plate people are using out there. I run a mits. 3015lvplus and they told me to run .19 minium carbon content and max silicon of .06. I usually order ipsco but really can't find it. Just wondering if there was anything im missing. Located close to green bay wisconsin.
 
Status
Not open for further replies.

Similar threads

B
  • Question Question
Will there be problems with the cutting section if the laser cutting speed is too fast or too slow?
Replies
3
Views
451
IRstuff
IRstuff
Garrett Green
  • Locked
  • Question Question
Mazak Laser having trouble cutting 1/2" Material
Replies
0
Views
1K
Garrett Green
Garrett Green
Hans H.
  • Locked
  • Question Question
Anti spatter for laser cutting?
Replies
1
Views
1K
Rex Hang
Rex Hang
Pablo_Garcia
  • Locked
  • Question Question
Seeking Guidance: Choosing the Right Laser Cutting Machine for Beginners
Replies
0
Views
922
Pablo_Garcia
Pablo_Garcia
waqasmalik
  • Locked
  • Question Question
Laser welding 0.5 mm thick stainless steel
Replies
1
Views
654
Rex Hang
Rex Hang

Part and Inventory Search

Sponsor

Back
Top