Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermwood Router for Printing

Status
Not open for further replies.
bigTomHanks

bigTomHanks

Mechanical
Joined
Dec 12, 2004
Messages
204
Location
US
We have a Thermwood router that we would like to modify to print on the blankets that we manufacture. Does anyone have any experience with an application like this. Is there a machine already available that you can put a generic part and specify where to print?
Thanks
 
Status
Not open for further replies.

Similar threads

Helepolis
  • Question Question
3D Printing of Functional Aerospace Prototypes?
Replies
14
Views
14K
Tobias King voxeljet
T
R
  • Question Question
calculation for tightening torque
Replies
5
Views
15K
dtimberlake
D
moiz19670309
  • Question Question
Hole size with tolerance for Shaft
Replies
7
Views
8K
Gr8blu
Gr8blu
R
  • Question Question
Looking for Help with Air Cylinder Selection for X-Z Slide Configuration
Replies
5
Views
4K
Stick.
Stick.
Sal Sham
  • Question Question
using a deep cycle battery for a forklift
Replies
4
Views
8K
TugboatEng
TugboatEng

Part and Inventory Search

Sponsor

Back
Top