Thermal Conductivity Test on Small Sample

[farmer2]

Need recommendation on labs that can run K value on sample of maximum size of 1.25" dia x .094" thick.

Need test run on instrument which gives a direct K value and which does not require any calculations or projections.

Sample is non-metallic, non-plastic and should have a low K value, likely less than 0.5 W/m-k.

 

[EdStainless]

Have you contacted TPRL at Purdue?

= = = = = = = = = = = = = = = = = = = =
Rust never sleeps
Neither should your protection

http://www.trent-tube.com/contact/Tech_Assist.cfm

 

[farmer2]

EdStainless,

Yes, I found them while searching over the weekend and called yesterday.

They have given me a quote to do the tests. Their web site is impressive.

Have you used them?

Thanks,