Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Thermal Barrier Coating Spallation on Gas Turbine

Status
Not open for further replies.
Pipoy04

Pipoy04

Mechanical
Joined
Nov 22, 2014
Messages
40
Location
QA
Dear Experts,

I would like to know if there's acceptance criteria for the TBC spallation of gas turbine blades?

Is there any reference codes or standards?
 
Sort by date Sort by votes
Usually this falls under the turbine OEM for guidance.
 
Upvote 0 Downvote
And your OEM really, really, really does NOT want you allowing ANYBODY else to analyze his turbine blade and vane designs, ceramics, cooling air flow, and - most espcially - any problems you (and he) may be having with his blade and vane designs!
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Kabootarman
  • Question Question
Soft Seats in Acid Gas service
Replies
1
Views
4K
SJones
SJones
rscosta1976
  • Locked
  • Question Question
Alloy 825 behavior under gas production environments
Replies
11
Views
2K
ShabsRBI
ShabsRBI
awesomeness
  • Question Question
Effect of microstructure on crevice corrosion for SDSS
Replies
5
Views
19K
weldstan
weldstan
mariolucas75
  • Locked
  • Question Question
Pitting corrosion on piping
Replies
13
Views
6K
EdStainless
EdStainless
B
  • Question Question
Corrosion(?) on stainless at a waste water plant
Replies
9
Views
16K
Dhurjati Sen
Dhurjati Sen

Part and Inventory Search

Sponsor

Back
Top