Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

The elset or tracer set parameter

Status
Not open for further replies.
cgriver

cgriver

Civil/Environmental
Joined
Jun 3, 2009
Messages
3
Location
IE
Hi All,
I run my model and got this message. However, I don't know which parameter need to be defined."THE ELSET OR TRACER SET PARAMETER IS REQUIRED ON THE *ELEMENT OUTPUT OPTION FOR THIS OUTPUT DATABASE HISTORY REQUEST"

I greatly appreciate your help
Mike
 
Status
Not open for further replies.

Similar threads

V
  • Locked
  • Question Question
Warning: New nodes or elements have been added to the mesh in instance [xxx] ' but are not included in any assembly sets or surface
Replies
3
Views
3K
FEA way
FEA way
F
  • Question Question
ABAQUS error - 'Node set assembly_left_rp' has not been defined
Replies
1
Views
3K
Vishakh_Rajendran
Vishakh_Rajendran
polak7
  • Solved
ECAP - material flows between the punch and the die?
Replies
4
Views
8K
polak7
polak7
Zivy98
  • Question Question
Why does the electrical potential not go the way I wanted?
Replies
3
Views
7K
FEA way
FEA way
S
  • Question Question
SPH Fluid Damping — How to Set Artificial Viscosity and Bulk Coefficients for Water vs PDMS in Abaqus/Explicit?
Replies
2
Views
3K
stevekoja
S

Part and Inventory Search

Sponsor

Back
Top