Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!
Testing for FRP
- Thread starter CoCoE
- Start date
Hi Cococa,
Depending on my experience, visual inspection for FRP equipment is best and effective way to assure the equipment integrity, of course, it's better to do inspection by relative expertise.
normally, spark test is also a good method to evaluate the integrity, but if you do in service equipment inspection, you should note the spark test, i think visual inspection is the only way.
And you can find out API 12P Specification for Fiberglass Reinforced Plastic Tank, I guess you can obtain more thechnical hint.
Depending on my experience, visual inspection for FRP equipment is best and effective way to assure the equipment integrity, of course, it's better to do inspection by relative expertise.
normally, spark test is also a good method to evaluate the integrity, but if you do in service equipment inspection, you should note the spark test, i think visual inspection is the only way.
And you can find out API 12P Specification for Fiberglass Reinforced Plastic Tank, I guess you can obtain more thechnical hint.
- Status
Similar threads
- Locked
- Question
- Question
