Eng-Tips is the largest forum for Engineering Professionals on the Internet.

Members share and learn making Eng-Tips Forums the best source of engineering information on the Internet!

Register Log in
  • Congratulations JStephen on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Test Separator for Produced Water

Status
Not open for further replies.
nickypaliwal

nickypaliwal

Materials
Joined
Aug 28, 2014
Messages
199
Location
OM
1) What are the typical material of construction for Test Separators ?

2) I have always observed Carbon Steel with Glass Flake Coating. Can there be any other coating as GRE lining ?

3) Is Glass flake coating is not susceptible to damage due to abrasion ?

 
Sort by date Sort by votes
Above query is for production fluid...
 
Upvote 0 Downvote
Its depends on composition and process parameters. We are using now Carbon steel+3mm CA with Phenolic Epoxy lining for separators.
we used CS+cladding also.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

mrmalcolm
  • Question Question
Is intergranular corrosion test required for duplex steel
Replies
9
Views
14K
EdStainless
EdStainless
rscosta1976
  • Locked
  • Question Question
Produced water oxygen ingress
Replies
4
Views
660
rscosta1976
rscosta1976
ShabsRBI
  • Locked
  • Question Question
Pump body for Sour Water Service
Replies
7
Views
2K
LittleInch
LittleInch
B
  • Question Question
Corrosion(?) on stainless at a waste water plant
Replies
9
Views
16K
Dhurjati Sen
Dhurjati Sen
awesomeness
  • Question Question
Effect of microstructure on crevice corrosion for SDSS
Replies
5
Views
19K
weldstan
weldstan

Part and Inventory Search

Sponsor

Back
Top