Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations LittleInch on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Templates in edit sheet option

Status
Not open for further replies.

basenxuser

Mechanical
Joined
Sep 27, 2007
Messages
69
Location
IN
Hi all,

Is there a way to populate my drawing templates in "Edit Sheet" option? so, that i can choose my appropriate template for the sheet.

Thanks in advance
basenxuser
 
Modify your PAX file. The name of it nxdm_ugs_sheet_templates.pax You will have to see where this is located in your system. Also do a search on this site for PAX files. There is many many discussions about this.
 
If you're using Teamcenter you'll need to edit the nxdm_ugs_sheet_templates.pax otherwise ugs_sheet_templates.pax is the native version.
Both of those files reside in the ...\UGII\templates folder.


Anthony Galante
Technical Resource Coordinator

NX5.0.6, NX6.0.5, NX7.5.0-> NX7.5.5 & NX8.0.0 -> NX8.0.3.4, NX8.5.0.23
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top