TEMP FLEX

[211272]

hi, in piping isometrie drawing i found TEMP FLEX that values is defferant from temp design. i'am asking for what TEMP FLEX does mean?
BEST REGARD

 

[BigInch]

What temperature values?

"Make everything as simple as possible, but not simpler." - Albert Einstein (1879-1955)
***************

http://virtualpipeline.spaces.live.com/

 

[C2it]

It may be that the line design temperature is too general to be used for stress analysis, and may only be for material and flange class selection. In this case a specific temperature would be assigned by Process on the Line List for stress analaysis ... a realistic temperature hopefully, and that would be the 'flex temp.'.