Feb 20, 2009 #1 trackatino Electrical Jan 16, 2009 3 hi..i want to know why tap points are usually made on the high voltage side of a tap changing transformer.
hi..i want to know why tap points are usually made on the high voltage side of a tap changing transformer.
Feb 20, 2009 #2 slavag Electrical May 15, 2007 2,044 Hi. High voltage=>Less current=>less arc on the contacts of tap changer. Best Regards. Slava Upvote 0 Downvote
Feb 20, 2009 #3 pwrengrds Electrical Mar 11, 2002 233 => and a smaller switch to buy => cheaper Upvote 0 Downvote
