Continue to Site

Eng-Tips is the largest engineering community on the Internet

Intelligent Work Forums for Engineering Professionals

  • Congratulations cowski on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tank Ring beam footing

Status
Not open for further replies.
Oct 30, 2014
11

Hi all, please advice the method to go about designing a annular raft for a tank ring beam. Could the choice be to design the strip footing/raft as per the method used is design footing for walls or I need to determine radial and circumferential moments.
 
Replies continue below

Recommended for you

I'm a bit confused by your description. Is the foundation you are designing a ring beam and supports a flat bottom storage tank?
 
. . . and how big is the tank - diameter and height; vertical or "on-side"?
 
There have been many discussions on this site about the need or otherwise for ring beams for storage tanks, and for design of ring beams if that type foundation is selected. I won't try to search through all these threads, but that should be the OP's first step.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor