Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations TugboatEng on being selected by the Eng-Tips community for having the most helpful posts in the forums last week. Way to Go!

Tack Weld a Nut 1

Status
Not open for further replies.
Brandy7

Brandy7

Automotive
Joined
Apr 27, 2007
Messages
33
Location
US
How should you indicate (callout) a Tack Weld for a Nut on a Drawing with Symbol/Verbage? Thanks for any Help.
 
Sort by date Sort by votes
Put a note in the tail if it is a tack to be consumed/removed (such as pre-production setup, etc). If it is not to be consumed/removed for final welding, call it out as an appropriately sized small fillet, and add a note if needed for clarity.
 
Upvote 0 Downvote
Status
Not open for further replies.

Similar threads

Miguel D
  • Locked
  • Question Question
Understanding weld callout
Replies
1
Views
1K
gtaw
gtaw
W1987
  • Locked
  • Question Question
Question about weld fillet reinforcement in PJP or CJP joints
Replies
2
Views
3K
SJones
SJones
ThaiVu
  • Locked
  • Question Question
AWS D1.1 - FILLET WELD BREAK TEST
Replies
7
Views
3K
ThaiVu
ThaiVu
Althalus
  • Locked
  • Question Question
Moment transfer through weld.
Replies
1
Views
943
dauwerda
dauwerda
iyMY
  • Locked
  • Question Question
AWS D1.1 Fillet Weld WPS Qualified Thickness
Replies
1
Views
2K
gtaw
gtaw

Part and Inventory Search

Sponsor

Back
Top